Sto SE & Co. KGaA
+49 7744 57-1010
infoservice@sto.com
www.sto.com


Sto Scandinavia AB
+46 13 37 71 00
kundkontakt@sto.com
https://www.sto.se
No preview image available
Product description:
StoVentec R is a ventilated rainscreen cladding system with a seamless render finish, allowing walls to breathe and levelling uneven substrates.
StoVentec R can be mounted on different types of substructures. The substructure or the insulation is not included in this declaration. The declaration includes the following components. The specific (Sto-)products of some components can vary:

StoVentec R organic:
- StoVentec Carrier Board / StoVentec Carrier Board A
- Fixing screws for StoVentec Carrier Board
(used for this declaration: StoVentec Screw /
Sto-Façade Screw)
- Basecoat
(used for this declaration: StoArmat Classic Plus)
- Compressed sealing tape made of impregnated flexible foam (used for this declaration:
StoVentec Waterproofing Joint 10/3-7)
- Protective profile for the outer edges of the render carrier board (used for this declaration:
Sto-Edge Protection Profile G)
- Stop profile with drip edge
(used for this declaration: Sto-Rain Guard Profile G)
- Edge profile with integrated glass fibre mesh
(used for this declaration:
Sto-Mesh Angle Bead Standard 11/13 cm)
- Alkali-resistant reinforcing mesh
(used for this declaration: Sto-Glass Fibre Mesh F)
- Finish (used for this declaration: StoLotusan K)
 
StoVentec R mineralic:
- StoVentec Carrier Board / StoVentec Carrier Board A
- Fixing screws for StoVentec Carrier Board
(used for this declaration: StoVentec Screw)
- Substrate coating
(used for this declaration: Sto Primer)
- Basecoat (used for this declaration: StoLevell Evo)
- Compressed sealing tape made of impregnated flexible foam (used for this declaration:
StoVentec Waterproofing Joint 10/3-7)
- Protective profile for the outer edges of the render carrier board (used for this declaration:
Sto-Edge Protection Profile G)
- Stop profile with drip edge
(used for this declaration: Sto-Rain Guard Profile G)
- Edge profile with integrated glass fibre mesh
(used for this declaration:
Sto-Mesh Angle Bead Standard 11/13 cm)
- Alkali-resistant reinforcing mesh
(used for this declaration: Sto Glass Fibre Mesh)
- Intermediate coat
(used for this declaration: StoPrep Miral)
- Finish (used for this declaration: StoLotusan K)
 
 
For the placing of the product on the market in the European Union/European Free Trade Association /EU/EFTA) (with the exception of Switzerland) the Regulation (EU) No. 305/2011 (CPR) applies.

The product needs a declaration of performance taking into consideration ETA no. ETA-17/0406 :date 13/6-2017, title StoVentec R  and the CE-marking.

For the application and use the respective national provisions apply.
 
de-DE
en-GB